Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

GC2e Wireless Security & Automation System (2GIG-GC2e) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product GC2e Wireless Security & Automation System (2GIG-GC2e)from 2GIG. To view other Z-Wave products and manuals from 2GIG follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
2GIG GC2e Wireless Security & Automation System
SKU Code
2GIG-GC2e
Description
2GIG sets the standard for exceptional performance that delivers true peace of mind. Key Features include eSeries encrypted 345Mhz sensors for enhanced security, legacy 345MHz 2GIG/Honeywell sensors, Z-Wave Plus with S2 security for longer range and advanced Z-Wave security, an entirely new sleek design, larger responsive capacitive touchscreen, and our best-in-class 2-way voice. Homeowners and dealers alike will appreciate the peace of mind they get from 2GIG GC2e experience. Works with Alarm.com and SecureNet.
Version #
HW: 2 FW: 6.04:22.00 was the version certified
Certification #
ZC10-20026863
Certified
2020-02-12T22:46:59.742185
Z-Wave Version
6.81.03

Security

As a Z-Wave Plus certified product, GC2e Wireless Security & Automation System supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control
  • S2 Authenticated
  • S2 Unauthenticated

Features

2GIG describes GC2e Wireless Security & Automation System as having the following features:

  • Battery Quantity
  • Battery powered using Nickel metal hydride (NiMH) batteries
  • Firmware updatable via a compatible Z-Wave gateway
  • Communications Connections
  • Communications Protocol
  • Controller Supports Multiple Z-Wave Interfaces
  • Color
  • Z-Wave Scene Type
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

SmartStart location

SmartStart QR code's location as follows: Under Learn Controller Sub menu of "Zwave/Smart Home"

using UI, "Learn Controller" under Z-Wave toolbox (Advanced)


Refer to controller Shift UI, under Z-Wave toolbox (Advanced)

using UI, "Adding Devices" under Z-Wave toolbox

Factory reset GC2e Wireless Security & Automation System

using UI, "Reset Controller" under Z-Wave toolbox (Advanced)

using UI, "Removing Devices" under Z-Wave toolbox

Please note that this is a user manual GC2e Wireless Security & Automation System from 2GIG is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have GC2e Wireless Security & Automation System and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.