The following is an overview of the user manual for the Z-Wave product Security Hub (F-ADT-HUB-1)from ADT SmartThings. To view other Z-Wave products and manuals from ADT follow that link.
Overview
Security
As a Z-Wave Plus certified product, Security Hub supports Z-Wave S2 security. The following security modes are directly supported:
Features
ADT describes Security Hub as having the following features:
- Communications Connections
- Firmware updatable via a compatible Z-Wave gateway
- Sensors
- Color
- Supported Meter Type
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
In the SmartThings mobile app, go to the ""My Home"" section, ""Things"" tab, and tap ""Add a Thing."" When the app shows ""Looking for devices..."" the panel is ready to include Z-Wave devices.
In the SmartThings mobile app, go to the ""My Home"" section, ""Things"" tab, and tap the name of the device to show the device details. Then, tap the gear icon in the upper right and tap ""Remove.""
Alternatively, open the side menu (""More"" in the iOS app) and tap on ""Hub is Online."" Tap ""Z-Wave Utilities"" then ""General Device Exclusion"" and then the ""Remove"" button to confirm. The panel will enter Exclude Mode.
In the SmartThings mobile app, open the side menu (""More"" in the iOS app) and tap on ""Hub is Online."" Tap ""Z-Wave Utilities"" then ""Add hub to an existing Z-Wave network"" and confirm to activate Learn Mode on the panel.
Factory reset Security Hub
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Security Hub from ADT SmartThings is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Security Hub and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.