Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Z-Wave USB Dongle (ZU1401EU-5) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Z-Wave USB Dongle (ZU1401EU-5)from Anchor. To view other Z-Wave products and manuals from Anchor follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Z-Wave USB Dongle
SKU Code
ZU1401EU-5
Description
Use this USB dongle to connect the computer for controlling the Z-Wave devices. Or you could use the USB dongle to connect with the control box which could be compatible with Z-Wave solution and reserved the USB port then you could control the Z-Wave devices as the gateway does. This Z-Wave+ Certified Hardware, when combined with a Z-Wave+ Application, provides an overall Z-Wave+ end user experience.
Version #
HW: 0 FW: ERROR was the version certified
Certification #
ZC10-17035503
Certified
2017-03-23T21:03:42.681759
Z-Wave Version
6.51.02

Security

As a Z-Wave Plus certified product, Z-Wave USB Dongle supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Anchor describes Z-Wave USB Dongle as having the following features:

    • Color
    • Communications Protocol
    • Firmware updatable via a compatible Z-Wave gateway
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Please note that this is a user manual Z-Wave USB Dongle from Anchor is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave USB Dongle and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.