The following is an overview of the user manual for the Z-Wave product Qua station (KTS31)from au. To view other Z-Wave products and manuals from au follow that link.
Overview
This also has the following features.
* IoT gateway function.
* Network-attached storage (NAS) function
- media server where user stores media files.
* Connectivity
- Wi-Fi feature as 802.11a/b/g/n/ac station.
- Bluetooth: Ver.4.0
- 4G LTE
Security
As a Z-Wave Plus certified product, Qua station supports Z-Wave S2 security. The following security modes are directly supported:
Features
au describes Qua station as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Communications Protocol
- Sensors
- Supported Notification Types
- Color
- Gateway Has Preferred Partners
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
It is to select the kinds of device by Smartphone application, and it induces to push down the program switch of device.
It described on uploaded manual in Japanese.
It is page 2 (Inclusion).
It is to select the kinds of device by Smartphone application, and it induces to push down the program switch of device.
It described on uploaded manual in Japanese.
It is page 8 (Exclusioin).
Factory reset Qua station
It is to push the RESET button for 10 seconds.
It described on uploaded manual in Japanese.
It is Page 10 (Reset).
The statement below also described on manual in Japanese.
""If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only
in the event that the network primary controller is missing or otherwise inoperable.""
Please note that this is a user manual Qua station from au is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Qua station and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.