The following is an overview of the user manual for the Z-Wave product August Smart Lock Rev 3 (ASL-03)from August Home. To view other Z-Wave products and manuals from August Home follow that link.
Overview
time.
Security
As a Z-Wave Plus certified product, August Smart Lock Rev 3 supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
Features
August Home describes August Smart Lock Rev 3 as having the following features:
- Battery powered using AA batteries
- Color
- Communications Connections
- Door Lock Type
- Firmware updatable via a compatible Z-Wave gateway
- Battery Quantity
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
In order to exclude the August Smart Lock from a Z-Wave network the user will have to do the following:
1. Open the August app
2. Go to the Lock Settings screen
3. Select Z-Wave Settings
4. Select Remove Z-Wave Device
5. Put the controller into exclusion mode and select My Hub is in Exlusion Mode on the August app
In order to include the August Smart Lock on to a Z-Wave network the user will have to do the following:
1. Open the August app
2. Go to the Lock Settings screen
3. Select Z-Wave Settings
4. Select Add To A Z-Wave Network
5. Put the controller into inclusion mode and select My Hub is in Inclusion Mode on the August app
Factory reset August Smart Lock Rev 3
In order to reset the August Smart Lock the user will have to do the following:
1. Open the August app
2. Go to the Lock Settings screen
3. Select Z-Wave Settings
4. Select Remove Z-Wave device
5. Select My Hub Is No Longer Working
6. Caution: Resetting a Z-Wave device without telling the hub can cause performance issues. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable.
7. Select Reset Z-Wave Device
8. On the Reset Z-Wave Device? prompt select Reset
Any operation (manual, RF, etc.) will wake up the lock.
Please note that this is a user manual August Smart Lock Rev 3 from August Home is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have August Smart Lock Rev 3 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.