The following is an overview of the user manual for the Z-Wave product Gateway (BBK001-Z00)from Beanbag. To view other Z-Wave products and manuals from Beanbag follow that link.
Overview
Security
As a Z-Wave Plus certified product, Gateway supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
- S2 Unauthenticated
Features
Beanbag describes Gateway as having the following features:
- Gateway Has Preferred Partners
- Color
- Communications Connections
- Firmware updatable via a compatible Z-Wave gateway
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To add (include) the Gateway into another controller’s network, user has to start the Add (Include) Node operation on the other controller, and then select either the “Learn Mode Classic” or the “Learn Mode NWI” option under the “Network Management” option on the APP.
To remove (Exclude) the Gateway into another controller’s network, user has to start the Remove (Exclude) Node operation on the other controller, and then select either the “Learn Mode Classic” or the “Learn Mode NWI” option under the “Network Management” option on the APP.
To put Gateway into Learn mode select either the “Learn Mode Classic” or the “Learn Mode NWI” option under the “Network Management” option on the APP.
Factory reset Gateway
For gateway factory reset select the “Reset” option on the APP under “Network Management” menu.
Note: If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Gateway from Beanbag is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Gateway and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.