Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Thermostat (BBK001-Z00) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Thermostat (BBK001-Z00)from Beanbag. To view other Z-Wave products and manuals from Beanbag follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Beanbag Thermostat
SKU Code
BBK001-Z00
Description
The Beanbag electronic room thermostat provides wireless temperature control of the space. It is battery powered by 2 X AA alkaline batteries with a projected operational life of > 2 years. The high quality OLED display provides access to the ambient temperature reading with a range of 0⁰C to 35⁰C with a granularity of 0.1⁰C. Set point adjustment is possible between 5⁰C to 35⁰C with a granularity of 0.5⁰C. It is designed to be wall mounted using a click on wall plate with optional facia plate. Enclosure protection is to IP30 with an operating temperature range of 0⁰C to 40⁰C. The HAN is established following a step by step process via the OLED display.
Version #
4.3.0.2.1 was the version certified
Certification #
ZC10-17065653
Certified
2017-06-06T20:35:21.508773
Z-Wave Version

Security

As a Z-Wave Plus certified product, Thermostat supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Beanbag describes Thermostat as having the following features:

    • Battery Quantity
    • Battery powered using AA LR6 alkaline, 2700 mAh, 1.5V each batteries
    • Color
    • Firmware updatable via a compatible Z-Wave gateway
    • Outdoor Use
    • Sensors
    • Thermostat HVAC Systems Supported
    • Thermostat Power Source
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset Thermostat

    On thermostat in advance mode scroll to option “Factory Reset”, then click OK button.

    Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable

    On thermostat, click OK button when device screen is off, or in advance mode scroll to option “Enter listening mode” then click OK button.

    On thermostat in advance mode scroll to option “Activate Learn Mode”, then click OK button.

    On thermostat in advance mode scroll to option “Remove device”, then click OK button. On other Z-Wave device start learn process, thermostat will display outcome on completion of the process.

    On thermostat in advance mode scroll to option “Add device”, then click OK button. On other Z-Wave device start learn process, thermostat will display outcome on completion of the process.

    Please note that this is a user manual Thermostat from Beanbag is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Thermostat and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.