The following is an overview of the user manual for the Z-Wave product Smart Hidden Door Lock with Deadbolt (BSL01)from BENETEK. To view other Z-Wave products and manuals from BENETEK follow that link.
Overview
Material: The lock was made of zinc alloy. The lock shell is 4mm thick. And the inside structure was made of metal. 304 stainless steel panel, the thickness of 1.5mm
Weight: 1800g,
Power supply method: Four AA alkaline batteries and one 18650 rechargeable backup battery.
Batteries lifetime: 2 groups of batteries, Rechargeable battery, Alkaline Batteries: Approximate 1 Year battery life (depend on the usage of the lock)
Features of the Latch: Lock Latch length > 25mm, Comply with GA/T73-94 5.16B standard. Latch size: 25x30x15mm, it is even stronger!
Low battery indicator: Prompt indicator in low pressure and It will unlock automatically when no electricity(optional)
Urgent method: Mechanical damage to unlock(It has mounting hole on the lock for mechanical lock)
Working environment: -30~70℃ Humidity<90%
Working current (MAX): <500mA
Static current of battery: <95μA
Wireless remote distance: 10m (Depend on environment)
Z-Wave distance(to Z-Wave server): 30m indoor
Appearance size: Lock body 152x80x40(mm) Panel: 125x50x25(mm)
Voltage of entrance guard: DC 6V~30V
Voltage of urgent power supply: DC 5V~6.5V (Optional)
Capacity of remote: 25pcs Can expand
Capacity of password: 13 sets
capacity of card: 104pcs can expand
Z-Wave frequency: 868.4 MHz - China/Europe, 908.4 MHz - USA, 921.4 MHz – Australia/New Zealand, 869.2 MHz - Russia
Security
As a Z-Wave Plus certified product, Smart Hidden Door Lock with Deadbolt supports Z-Wave S2 security. The following security modes are directly supported:
Features
BENETEK describes Smart Hidden Door Lock with Deadbolt as having the following features:
- Door Lock Type
- Battery Quantity
- Battery powered using AA batteries
- Color
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1) Ensure the SHDL is powered and the battery is fully charged.
2) Set the main controller into the Remove device mode (see a main controller’s operating manual).
3) Triple click Z-Wave button on the Z-Wave module(inside lock body) within 1.5 seconds, the LED will flicker rapidly while exclusion process implement and light on 2 second after processing complete.
Factory reset Smart Hidden Door Lock with Deadbolt
Smart Hidden Door Lock restores factory default automatically when the device is excluded.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
1) Ensure the SHDL is powered and the battery is fully charged.
2) Set the main controller into the Add device mode (see a main controller’s operating manual).
3) Triple click Z-Wave button on the Z-Wave module(inside lock body) within 1.5 seconds, the LED will flicker rapidly while inclusion process implement and light on 2 second after processing complete.
BASIC command class maps to Door Lock Operation command class.
Due to SHDL only re-lock automatic while door close and detect by magnetic on the lock, so if Door Lock receives either a Door Lock Operation Set (secure the door) or a Basic Set (0xFF) the command is
rejected and always fail in Application Reject Command reply and follow with current door lock status report.
Please note that this is a user manual Smart Hidden Door Lock with Deadbolt from BENETEK is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Hidden Door Lock with Deadbolt and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.