The following is an overview of the user manual for the Z-Wave product ClareOne Panel (CLR-C1-PNLX)from Clare Controls. To view other Z-Wave products and manuals from Clare Controls follow that link.
Home Automation and Control System with added Home Security.
As a Z-Wave Plus certified product, ClareOne Panel supports Z-Wave S2 security. The following security modes are directly supported:
Clare Controls describes ClareOne Panel as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Classic Inclusion Mode (Adding Mode): This mode allows the controller to add one node to the Z-Wave network. The controller stays in this mode until a device is added to the network or until it is manually reset, and then the controller switches to normal mode.
Classic Exclusion Mode (Removing Mode): This mode allows the controller to remove a device from the Z-Wave network. The controller stays in this mode until a device is removed from the network, or until it is manually reset, and then the controllers switches to normal mode.
Learn Mode activation (Learning Mode): This mode allows the controller to be added into another network. All current network information in the controller is reset. It is reset and all current network information is lost. The controller adopts the home ID of the adding controller.
Controller Replicator Mode: This mode allows the controller to be replicated (copied).
Factory reset ClareOne Panel
Factory Reset Mode: This mode will reset the controller to factory settings. Use this mode with caution.
Please note that this is a user manual ClareOne Panel from Clare Controls is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have ClareOne Panel and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.