The following is an overview of the user manual for the Z-Wave product Psm-29zw (PSM-29ZW)from Climax Technology. To view other Z-Wave products and manuals from Climax Technology follow that link.
Overview
The PSM-29ZW can be programmed to automatically run home appliances. They enable you to turn on/off appliances from a smartphone or tablet anytime, anywhere.
Security
As a Z-Wave Plus certified product, Psm-29zw supports Z-Wave S2 security. The following security modes are directly supported:
Features
Climax Technology describes Psm-29zw as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Plug the Power Switch into a power outlet.
2. Put the Z-wave gateway or control panel into Inclusion or Learning mode (please refer to the Z-wave gateway or control panel manual).
3. Within 1.5 seconds, press the Switch Button 3 times.
4. Refer to the operation manual of the Z-wave gateway or control panel to complete the learn-in process.
5. If the device has already been included (learnt) into another Z-wave Gateway/Control Panel, or if the device is unable to be learnt into the current Z-wave Gateway/Control Panel, please exclude it first (see Exclusion) before attempting to include it into the current Z-wave Gateway/Control Panel.
1. Put the Z-wave gateway or control panel into Exclusion mode (please refer to the Z-wave gateway or control panel manual).
2. Within 1.5 seconds, press the Switch Button 3 times and the device will be removed from the Z-wave network.
Always on
Metering
Factory reset Psm-29zw
Please use this procedure only in the event that the primary network controller is missing or otherwise inoperable.
1. Press and hold the Switch Button of the device for 12 seconds to factory reset.
2. Factory resetting the device will restore it to factory default settings (excluded from the Z-wave network). The Z-wave gateway or control panel will still keep its Z-wave settings. Please refer to the gateway or control panel manual on how to remove the device’s Z-wave settings.
3. Factory resetting the device will also clear all accumulated power data.
1. Plug the Power Switch into a power outlet.
2. Put the Z-wave gateway or control panel into Inclusion or Learning mode (please refer to the Z-wave gateway or control panel manual).
3. Within 1.5 seconds, press the Switch Button 3 times.
4. Refer to the operation manual of the Z-wave gateway or control panel to complete the learn-in process.
5. If the device has already been included (learnt) into another Z-wave Gateway/Control Panel, or if the device is unable to be learnt into the current Z-wave Gateway/Control Panel, please exclude it first (see Exclusion) before attempting to include it into the current Z-wave Gateway/Control Panel.
Please note that this is a user manual Psm-29zw from Climax Technology is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Psm-29zw and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.