The following is an overview of the user manual for the Z-Wave product Smart Lock (CDL-107U)from COMMAX CO.,LTD.. To view other Z-Wave products and manuals from COMMAX follow that link.
Overview
You can control the door lock directly from a phone via the Bluetooth function in close range, check the status of the door lock on the outside by connection to the Z-Wave hub as well as control door locks and check status via Google Home or Amazon Alexa.
Security
As a Z-Wave Plus certified product, Smart Lock supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
- S2 Authenticated
Features
COMMAX describes Smart Lock as having the following features:
- Battery Quantity
- Battery powered using AA batteries
- Door Lock Type
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
* Please proceed with the door lock open
* To add or include the CDL-107U into a Z-Wave network
1. Set the controller in inclusion mode.
2. Press the [R] button for 6 seconds.
3. Press the [1][4][7] button after pressing the [R] button.
* Please proceed with the door lock open
* To remove or exclude the CDL-107U into a Z-Wave network
1. Set the controller in exclusion mode.
2. Press the [R] button for 6 seconds.
3. Press the [3][6][9] button after pressing the [R] button.
Factory reset Smart Lock
* To Factory Reset
Please use this procedure only when the primary controller is missing or otherwise inoperable.
1. Press the [R] button for 9 seconds
2. Press the [1][2][3][6][5][4][7] button after pressing the [R] button
* Wake up
1. Touch the touch panel
Please note that this is a user manual Smart Lock from COMMAX CO.,LTD. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.