Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Staples Connect Hub powered by D-Link (DCH-G021) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Staples Connect Hub powered by D-Link (DCH-G021)from D-Link Corporation. To view other Z-Wave products and manuals from D-Link Corporation follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Staples Connect Hub powered by D-Link
SKU Code
DCH-G021
Description
With Staples Connect™ and a smartphone, tablet or PC, you have the ability to remotely control all of your enabled electronics with one easy-to-use app. This gives you the freedom to control all of your favorite home brands. Plus they can communicate with each other for a wholly integrated and automated home.
Version #
28 was the version certified
Certification #
ZC10-14090019
Certified
2014-09-18T18:33:35.53189
Z-Wave Version
6.51.01

Security

As a Z-Wave Plus certified product, Staples Connect Hub powered by D-Link supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    D-Link Corporation describes Staples Connect Hub powered by D-Link as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Click “Device Assistant”
    Click “Add Device”
    Select the Z-Wave product from the Catalog.
    Click “Find”
    Select your specific device
    Follow the onscreen instructions and click “add” which adds the product to the network.

    Click “Device Assistant”
    Click “Remove Device”
    Click “Z-Wave”
    Follow the product manufactures removal instructions and then click “Remove” to exclude the Z-Wave device.

    On home tile screen click “Hub Settings”
    Click “Advanced Options”
    Click “Learn ZW” under (Learn Z-Wave Network) and follow the on screen instructions.

    Factory reset Staples Connect Hub powered by D-Link

    On home tile screen click “Hub Settings”
    Click “Advanced Options”
    Click “Restore” (under Restore to Factory Settings) and follow the on screen instructions.

    N/A

    N/A

    Please note that this is a user manual Staples Connect Hub powered by D-Link from D-Link Corporation is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Staples Connect Hub powered by D-Link and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.