PowerGate (PG200) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product PowerGate (PG200)from DeepSense. To view other Z-Wave products and manuals from DeepSense follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


SKU Code
PowerGate is a Power Meter Sensor that measure whole home electric usage.
You can view power and power usage in your Z-Wave controller or your apps.
It helps you to monitor and efficiently manage your household electricity usage.
Version #
HW: 255 FW: 1.34 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, PowerGate supports Z-Wave S2 security. The following security modes are directly supported:


    DeepSense describes PowerGate as having the following features:

    • Sensors
    • Supported Meter Type
    • Color
    • Switch Load Capacity Current
    • Switch Load Capacity Volt-Ampere
    • Switch Load Capacity Watts
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset PowerGate

    Press and hold button for 10 seconds until RED led indicators blink.
    PowerGate will be initialized and send a device reset locally notification to the controller. Use this function only if the primary controller is lost or otherwise inoperable.

    When the controller is in add mode, press and hold the button for 3 seconds until the RED LED indicator blinks.

    When the controller is in remove mode, press and hold the button for 3 seconds until the RED LED indicator blinks. When the PowerGate unit is disconnected from the Z-Wave network, the RED LED indicator will be toggled every second.

    Please note that this is a user manual PowerGate from DeepSense is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have PowerGate and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.