The following is an overview of the user manual for the Z-Wave product Metering Plug (MT02646)from devolo. To view other Z-Wave products and manuals from devolo follow that link.
Overview
intended destination by routing the signal around obstacles and radio dead spots. Because Home Control Metering Plug supports Security Command Class, it can be added with a Secured controller. Its functionality and supported command classes is identical when included as a secure and non-secure device.
This plug-in ON/OFF switch is able to detect instance wattage (3000W/CE/CN,1500W/UL/TW/JP) and overload current (14.5A) of connected lights or appliances. When detecting overload state, the Switch will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, unplug and re-connect the switch will reset its overload condition to normal status.
Security
As a Z-Wave Plus certified product, Metering Plug supports Z-Wave S2 security. The following security modes are directly supported:
Features
devolo describes Metering Plug as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.
2. Pressing On/Off button three times within 2 seconds will enter inclusion
mode on the switch.
1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.
2. Pressing On/Off button three times within 2 seconds will enter exclusion
mode on the switch.
Factory reset Metering Plug
(Use this procedure only in the event that the primary controller is lost or otherwise inoperable.)
1. Pressing On/Off button three times within 2 seconds will enter inclusion mode on the switch.
2. Within 1 second, press On/Off button again for 5 seconds.
Please note that this is a user manual Metering Plug from devolo is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Metering Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.