The following is an overview of the user manual for the Z-Wave product Solo 4K (Solo4K)from Dune HD. To view other Z-Wave products and manuals from Dune HD follow that link.
Overview
The media player / set-top-box part is based on Sigma Designs SMP8758 media processor. It supports the playback of various kind of audio and video content (4K and FullHD video including support for HEVC video codec and 10-bit color encoding, 3D video, high-end audio formats with high resolution up to 24-bit / 192 KHz, IPTV and VOD content, digital TV channels, etc) from various sources (USB storage devices, SATA HDD, local network, Internet).
The Z-Wave Controller function is based on Sigma Designs ZM5304 Z-Wave module and Z-Wave Controller software stack "Z-Way" from Z-Wave.Me. It supports controlling various types of Z-Wave devices, provides rich Z-Wave configuration and diagnostics possibilities, provides powerful Home Automation and integration features (including scripting and API).
Security
As a Z-Wave Plus certified product, Solo 4K supports Z-Wave S2 security. The following security modes are directly supported:
Features
Dune HD describes Solo 4K as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
In the main Web UI (http://IP-address:8083): click ""Settings"" icon at the right top of the screen, choose ""Devices"" menu item, click ""Manage"" button in the ""Z-Wave section"", click ""Remove"" button (""X"" icon) for the selected device, click ""Start exclusion"" button.
In the main Web UI (http://IP-address:8083): click ""Settings"" icon at the right top of the screen, choose ""Devices"" menu item, click ""Add new"" button in the ""Z-Wave"" section.
Factory reset Solo 4K
In the Expert Web UI (http://IP-address:8083/expert): click ""Network"" item at the top of the screen, choose ""Control"" menu item, click ""Controller Factory Default"" button.
NOTE: use the reset procedure with extreme care, only when the primary controller is missing or inoperable.
In the Expert Web UI (http://IP-address:8083/expert): click ""Network"" item at the top of the screen, choose ""Control"" menu item, click ""Start Learn Mode"" button.
Please note that this is a user manual Solo 4K from Dune HD is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Solo 4K and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.