Ls1015 (1015) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Ls1015 (1015)from EchoLife. To view other Z-Wave products and manuals from EchoLife follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


EchoLife LS1015
SKU Code
EchoLife LS1015 is a smart home device. It can works as Z-Wave Central Static Controller, and use for management of Z-Wave slave devices. Z-Wave frequency is 921.4MHz-919.8MHz
Version #
1.1.0 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Ls1015 supports Z-Wave S2 security. The following security modes are directly supported:


    EchoLife describes Ls1015 as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Step 1: Start the SmartHome app, and log in.
    Step 2: On the device management page, touch +. Then add the sensor to the gateway as prompted step-by-step.

    Step 1: On the device management page, touch the sensor to be deleted.
    Step 2: On the device details page, touch the menu on the upper right.
    Step 3: In the displayed menu, touch Delete.
    Step 4: Delete the sensor as prompted. After each operation is complete, touch Next to go
    to the next page. The SmartHome app provides different pages for deleting different types of sensors.
    Step 5: The sensor is deleted successfully.

    LS1015 is AC power supply, not battery powered.

    Factory reset Ls1015

    You can login the WEB of LS1015 to set the product to the factory default state.
    Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

    Step 1: Log in to the IoT platform with the user name and password specified.
    Step 2: After login, click Assets. Click Name of the gateway for which Learn Mode to be enabled
    Step 3: On the Details page, select OPEN for Set Learn Mode.

    Please note that this is a user manual Ls1015 from EchoLife is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Ls1015 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.