Z-wave Ac Master (ZXT-600JP) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Z-wave Ac Master (ZXT-600JP)from ECO LIFE ENGINEERING. To view other Z-Wave products and manuals from Eco Life Engineering follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Z-WAVE AC MASTER
SKU Code
ZXT-600JP
Description
ZXT-600 AC Master is a Z-Wave plus certified IR Bridge for split air conditioner control by receiving Z-Wave command and translating to Infrared command and flawlessly work with any Z-Wave compliant gateway.
With its over 250 brands built-in code library and ever-green up to date cloud IR database supporting advanced code learning search, ZXT-600 can easily set up and smart control most of AC brands and models actively worldwide by Z-Wave gateway.
The battery powered device will allow you to mount it anywhere you want such as wall, ceiling or put it on table and never compromise on the form factor. By supporting OTA function, gateway can enable ZXT-600 to update firmware if newest available.
Version #
HW: 3 FW: 1.03:01.07:171.06 was the version certified
Certification #
ZC10-18036053
Certified
2018-03-12T17:05:46.395129
Z-Wave Version
6.61.00

Security

As a Z-Wave Plus certified product, Z-wave Ac Master supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Eco Life Engineering describes Z-wave Ac Master as having the following features:

    • Battery Quantity
    • Thermostat HVAC Systems Supported
    • Thermostat Modes
    • Battery powered using AA batteries
    • Color
    • Firmware updatable via a compatible Z-Wave gateway
    • Sensors
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1 Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode
    2 When it is prompted to enter it, please triple click the “PROG” button within 1 second. Green Indicator flashes TWICE then stay off

    1 Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode
    2 When it is prompted to enter it, please triple click the “PROG” button within 1 second. Green Indicator flashes TWICE then stay off

    Factory reset Z-wave Ac Master

    Press and Hold “PROG” button for 3 seconds on AC Master, the Green Indicator will light up. DO NOT Release the “PROG” Button until Green Indicator flashes TWICE.
    Remark : All the Setting and Data will be permanently deleted.
    Please use this procedure only when the network primary controller is missing or otherwise inoperable.

    Please note that this is a user manual Z-wave Ac Master from ECO LIFE ENGINEERING is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-wave Ac Master and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.