The following is an overview of the user manual for the Z-Wave product Door Window Sensor (DWZWAVE2.5-ECO)from Ecolink Intelligent Technology. To view other Z-Wave products and manuals from Ecolink follow that link.
Overview
-Z-Wave Plus certified
-Frequency 908.42MHz
-Range up to 100 feet
-Battery life up to 3 years with 50 openings/closing per day
-CR123A Lithium battery
-Input on the sensor for non-powered external contact
-BOTH brown and white cases included in each box
Security
As a Z-Wave Plus certified product, Door Window Sensor supports Z-Wave S2 security. The following security modes are directly supported:
Features
Ecolink describes Door Window Sensor as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Once the controller is in inclusion mode, either remove the battery isolation tab, OR insert the battery to power up the sensor.
Once the controller is in exclusion mode, either remove the battery isolation tab, OR insert the battery to power up the sensor.
Factory reset Door Window Sensor
To restore this sensor to factory default settings, follow the instructions in the manual to exclude this sensor from the Z-Wave network. Upon completion of removal from the network the sensor will restore itself to factory default settings automatically. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
If sensor is sleeping, remove the cover to wake up.
Has external contact input. This contact is in PARALLEL to the magnetic reed switch, meaning one or the other can be used.
Please note that this is a user manual Door Window Sensor from Ecolink Intelligent Technology is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Door Window Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.