10 Year Z-Wave Smoke Alarm (Ei600ZW) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product 10 Year Z-Wave Smoke Alarm (Ei600ZW)from Ei Electronics. To view other Z-Wave products and manuals from Ei Electronics follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
10 Year Z-Wave Smoke Alarm
SKU Code
Ei600ZW
Description
This product consists of a standard high-quality, 10 year sealed-battery photoelectric Smoke Alarm designed to European standards, combined with a plug-in Z-­Wave wireless communication module.
The Smoke Alarm will also work as a stand-alone product and is certified by VDS as '10 year Smoke Alarm' and satisfies all EN14604 requirements.
Patented, high-performance optical chamber with integral micro-mesh fixed insect screen further reduces the possibility of false alarms. A large test button allows on-device testing of smoke chamber, electronics and battery. The device also offers a built-­in self-test and an electronic smoke chamber test making the use of test aerosol unnecessary.
A low battery warning will last for 30 days, but full function of the Alarm will continue during this time.
The Z-Wave module allows the device to report smoke and low battery alarms wirelessly to a central Z-Wave Controller.
Version #
HW: 1 FW: 1.00 was the version certified
Certification #
ZC10-16035024
Certified
2016-03-23T11:48:30.4028
Z-Wave Version
6.51.06

Security

As a Z-Wave Plus certified product, 10 Year Z-Wave Smoke Alarm supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Ei Electronics describes 10 Year Z-Wave Smoke Alarm as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset 10 Year Z-Wave Smoke Alarm

    To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5
    seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable.

    To exclude the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second

    To include the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second

    Please note that this is a user manual 10 Year Z-Wave Smoke Alarm from Ei Electronics is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have 10 Year Z-Wave Smoke Alarm and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.