The following is an overview of the user manual for the Z-Wave product Z-Wave STICK (USB-01-WZ)from Eltex. To view other Z-Wave products and manuals from Eltex follow that link.
Overview
The USB STICK operates as a hardware interface for connection of Z-Wave devices on a network with a host:
The device operates at 869 MHz using Z-Wave radio protocol to interact with devices on a Z-Wave network. Connecting to a PC/ laptop or other system through USB 2.0, the device transmits data gathered from the Z-Wave devices to a host. Thus, ELTEX Z-Wave STICK connects devices on the network with a network controller.
General characteristics:
Radio protocol: Z-Wave
Radio frequency: 869 MHz
Interface: USB 2.0
Z-Wave hardware platform: ZM5101 – 500 Series
Z-Wave Role Type: Hardware device
Using ELTEX Z-Wave STICK together with Z-Wave controller, you may manage your Z-Wave network: add and remove devices, monitor status of the devices on the network, create scenarios and templates for the network operation and much more.
Security
As a Z-Wave Plus certified product, Z-Wave STICK supports Z-Wave S2 security. The following security modes are directly supported:
Features
Eltex describes Z-Wave STICK as having the following features:
- Communications Protocol
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Z-Wave STICK
To reset the Z-Wave USB Stick to the default settings, press the Set Default button on GUI.
Please note that this is a user manual Z-Wave STICK from Eltex is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave STICK and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.