The following is an overview of the user manual for the Z-Wave product Plug-in Smart Meter Appliance Module (ZWN-333M)from Enerwave Green Automation. To view other Z-Wave products and manuals from Enerwave Green Automation follow that link.
Overview
Security
As a Z-Wave Plus certified product, Plug-in Smart Meter Appliance Module supports Z-Wave S2 security. The following security modes are directly supported:
Features
Enerwave Green Automation describes Plug-in Smart Meter Appliance Module as having the following features:
- Supported Meter Type
- Switch Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Once program button is pressed and hold for 3 second, the device will enter into
learn mode to accomplish adding or removing by controller. Refer to the instruction
for your primary controller to access the setup function and add or remove devices.
Once program button is pressed and hold for 3 second, the device will enter into
learn mode to accomplish adding or removing by controller. Refer to the instruction
for your primary controller to access the setup function and add or remove devices.
Factory reset Plug-in Smart Meter Appliance Module
Once program button is pressed and hold for 10 second, the device will send a device reset locally notification to controller. Then clear all of information for the network, and restore factory defaults, and reset the module. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Plug-in Smart Meter Appliance Module from Enerwave Green Automation is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Plug-in Smart Meter Appliance Module and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.