The following is an overview of the user manual for the Z-Wave product Outdoor Smart Plug - 1 channel (ZW96)from EVA LOGIK. To view other Z-Wave products and manuals from Eva Logik follow that link.
Overview
Security
As a Z-Wave Plus certified product, Outdoor Smart Plug - 1 channel supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Eva Logik describes Outdoor Smart Plug - 1 channel as having the following features:
- Electric Load Type
- Color
- Switch Load Capacity Watts
- Switch Type
- Firmware updatable via a compatible Z-Wave gateway
- Outdoor Use
- Supported Notification Types
- Switch Load Capacity Volt-Ampere
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Outdoor Smart Plug - 1 channel
---Power off ZW96
---keep holding the PROG button
---Power on,Press and keep holding the PROG button for no less than 10 seconds.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
1:Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
2:When prompted by your primary controller, click the PROG button five times in one second.
1:Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
2:When prompted by your primary controller, click the PROG button five times in one second.
Please note that this is a user manual Outdoor Smart Plug - 1 channel from EVA LOGIK is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Outdoor Smart Plug - 1 channel and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.