The following is an overview of the user manual for the Z-Wave product Outdoor Smart Plug - 1 channel (ZW96S)from EVA LOGIK. To view other Z-Wave products and manuals from Eva Logik follow that link.
Overview
Security
As a Z-Wave Plus certified product, Outdoor Smart Plug - 1 channel supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Eva Logik describes Outdoor Smart Plug - 1 channel as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Outdoor Use
- Color
- Electric Load Type
- Switch Load Capacity Current
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Outdoor Smart Plug - 1 channel
MANUAL RESET
---Power off ZW96S
---keep holding the PROG button
---Power on,Press and keep holding the PROG button for no less than 10 seconds.
Please use this procedure only when the network primary controller is missing or otherwise inoperable."
ADD theZW96S from the existing Z-Wave home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the Up or Down button three times in one second.
Include ZW96Sto/from a Z-Wave Gateway with supporting Security.The ZW96Scan support the Primary Controller that implemented the security S2.
Remove the ZW96S from the existing Z-Wave home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the Up or Down button three times in one second.
Include ZW96S to/from a Z-Wave Gateway with supporting Security.The ZW96S can support the Primary Controller that implemented the security S2.
Please note that this is a user manual Outdoor Smart Plug - 1 channel from EVA LOGIK is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Outdoor Smart Plug - 1 channel and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.