The following is an overview of the user manual for the Z-Wave product Z-Wave 500 USB dongle (SA413-1)from Everspring. To view other Z-Wave products and manuals from Everspring follow that link.
Overview
Security
As a Z-Wave Plus certified product, Z-Wave 500 USB dongle supports Z-Wave S2 security. The following security modes are directly supported:
Features
Everspring describes Z-Wave 500 USB dongle as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Press ”Add” button for Dongle to enter Include Mode.
2. Please have Device in Include Mode.
1. Press ”Remove” button for Dongle to enter Exclude Mode.
2: Please have Device in Exclude Mode.
Factory reset Z-Wave 500 USB dongle
1. Press ”Reset”button.
2.Then the Home ID of Dongle will resume back to default value.
Please note that this is a user manual Z-Wave 500 USB dongle from Everspring is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave 500 USB dongle and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.