Z-Wave 500 USB dongle (SA413-2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Z-Wave 500 USB dongle (SA413-2)from Everspring. To view other Z-Wave products and manuals from Everspring follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Z-Wave 500 USB dongle
SKU Code
This SA413 Z-Wave 500 USB is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used regardless of manufacturer. A Silicon labs driver “ZW050x_USB_VCP_PC_Driver” and Silicon labs PC control software “ZWavePCController” are required to operate this device. A PC / notebook running Z-Wave software can control Z-Wave network through this USB.
Version #
HW: 0 FW: ERROR was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Z-Wave 500 USB dongle supports Z-Wave S2 security. The following security modes are directly supported:


    Everspring describes Z-Wave 500 USB dongle as having the following features:

    • Color
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Please note that this is a user manual Z-Wave 500 USB dongle from Everspring is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave 500 USB dongle and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.