The following is an overview of the user manual for the Z-Wave product Keypad Electronic Z-WAVE Deadbolt (A50-WG040)from FAULTLESS. To view other Z-Wave products and manuals from FAULTLESS follow that link.
Overview
Security
As a Z-Wave Plus certified product, Keypad Electronic Z-WAVE Deadbolt supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
FAULTLESS describes Keypad Electronic Z-WAVE Deadbolt as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
SmartStart location
SmartStart QR code's location as follows: "find the DSK on the sticker on the left or on the battery case."
Press [SET] for 1 second. → Programming Code (4-6 digits) → press the Lock mark bottom → press number 9 → press number 0 → Include successfully (beep x 1)
Press [SET] for 1 second. → Programming Code (4-6 digits) → press the Lock mark bottom → press number 9 → press number 0 → Exclude successfully (beep x 1)
NA
Factory reset Keypad Electronic Z-WAVE Deadbolt
Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.
Please note that this is a user manual Keypad Electronic Z-WAVE Deadbolt from FAULTLESS is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Keypad Electronic Z-WAVE Deadbolt and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.