The following is an overview of the user manual for the Z-Wave product Home Area Manager (98-002)from fifthplay nv. To view other Z-Wave products and manuals from fifthplay follow that link.
Overview
• Modular hardware platform, customizable and extendible by means of bricks (hardware building blocks) and USB interfaces to support various protocols and devices.
• Modular software platform, with remote software upgradeable and support functions.
• Easy and intuitive installation and configuration.
• Broadband internet connection.
• Remote access for the customer via Web and Smartphone APP’s.
Security
As a Z-Wave Plus certified product, Home Area Manager supports Z-Wave S2 security. The following security modes are directly supported:
Features
fifthplay describes Home Area Manager as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Gateway Has Preferred Partners
- Supported Notification Types
- Communications Connections
- Communications Protocol
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
The controller must be previously registered by the end customer through the website https://home.fifthplay.com. Once registered and logged in customer can include Z-Wave devices by going to the 'Configuration' page. Select 'Add Device' and follow the instructions. Preferred devices have a wizard who will guide user step by step through inclusion process.
The controller must be previously registered by the end customer through the website https://home.fifthplay.com. Once registered and logged in customer can exclude Z-Wave devices by going to the 'Configuration' page. The list of included devices are shown. The option is provided here to exclude devices.
Factory reset Home Area Manager
The controller runs a local webserver which can be reached by browsing to the controller's MAC address preceded by 'http://FP'. Example: http://FP
A Z-Wave settings page is shown which can be opened by providing a password which is the serial number of the controller (can be found on back of controller). Then the option to 'Learn Mode' will be visible.
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
The controller runs a local webserver which can be reached by browsing to the controller's MAC address preceded by 'http://FP'. Example: http://FP
A Z-Wave settings page is shown which can be opened by providing a password which is the serial number of the controller (can be found on back of controller). Then the option to 'Learn Mode' will be visible.
Please note that this is a user manual Home Area Manager from fifthplay nv is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Home Area Manager and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.