The following is an overview of the user manual for the Z-Wave product Gas Detector (HT-A20)from Gas Keeper. To view other Z-Wave products and manuals from Gas Keeper follow that link.
Overview
Security
As a Z-Wave Plus certified product, Gas Detector supports Z-Wave S2 security. The following security modes are directly supported:
Features
Gas Keeper describes Gas Detector as having the following features:
- Color
- Firmware updatable via a compatible Z-Wave gateway
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Non battery
Press On/OFF button for 5 seconds till hearing beep once.
When inclusion completes, you will hear ‘beep’ sound with voice message alert. When inclusion completes, Connection LED will be on.
Press On/OFF button for 5 seconds till hearing beep once.
When exclusion completes, you will hear ‘beep’ sound with voice message alert. When exclusion completes, Connection LED will be off. (The same as the inclusion method)
Factory reset Gas Detector
Press On/OFF button for 10 seconds till hearing beep once.
When reset completes, you will hear ‘beep’ sound with voice message alert.
(Reset function, the primary controller will be used only when does not exist or inoperative.)
Detect gas leak.
Notify gas leak via voice message and warning alarm.
* When the gas ventilation completes after gas leak alarm, it will operate normally. (No need to reset)
Please note that this is a user manual Gas Detector from Gas Keeper is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Gas Detector and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.