The following is an overview of the user manual for the Z-Wave product A20-sh (GDA-A2E6B-K0)from GATEMAN. To view other Z-Wave products and manuals from GATEMAN follow that link.
Overview
'A20-SH' is a security enabled Z-Wave Plus product for Korean domestic market. It can be included and operated in any Z-Wave network with other Z-Wave certified devices.
Security
As a Z-Wave Plus certified product, A20-sh supports Z-Wave S2 security. The following security modes are directly supported:
Features
GATEMAN describes A20-sh as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
① Touch Keypad with palm.
② Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode).
③ Press 'I' button [Registration] from the inside of battery cover.
④ Press 9, #, 1, # by sequence on the keypad(to Add).
⑤ Wait until ""Ding dong dang"" melody play, then press 'I' button [Registration] from the inside of battery cover.
① Touch Keypad with palm.
② Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode).
③ Press 'I' button [Registration] from the inside of battery cover.
④ Press 9, #, 3, # on the keypad by sequence (to Delete).
⑤ Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode), then press #.
⑤ Wait until ""Ding dong dang"" melody play, then press 'I' button [Registration] from the inside of battery cover.
Factory reset A20-sh
This product has no function to go back to the factory default.
The lock is always in ""wake up status"".
However, touch keypad with palm to begin and end actions.
Please note that this is a user manual A20-sh from GATEMAN is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have A20-sh and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.