Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Plug-in Outdoor Smart Switch (14284/ZW4201) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Plug-in Outdoor Smart Switch (14284/ZW4201)from GE. To view other Z-Wave products and manuals from GE follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Plug-in Outdoor Smart Switch
SKU Code
14284/ZW4201
Description
Transform any home into a smart home with the GE Z-Wave Outdoor Smart Switch. The lighting control enables wireless control of on/off functions for outdoor applications, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs. The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use. The discreet black color blends in with any outdoor environment. Perfect for decorative or seasonal lighting, fountains and other outdoor plug-in appliances. Take control of your home lighting with GE Z-Wave Smart Lighting Controls!
Version #
HW: 255 FW: 5.21 was the version certified
Certification #
ZC10-16065129
Certified
2016-06-30T12:14:12.5408
Z-Wave Version
6.51.06

Security

As a Z-Wave Plus certified product, Plug-in Outdoor Smart Switch supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    GE describes Plug-in Outdoor Smart Switch as having the following features:

    • Firmware updatable via a compatible Z-Wave gateway
    • Outdoor Use
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset Plug-in Outdoor Smart Switch

    1. If plugged in, unplug the Switch from the receptacle.
    2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.

    1. Follow the instructions for you Z-Wave certified controller to include the smart switch to the Z-Wave network.
    2. Once the controller is ready to include your outdoor smart switch, press and release the manual/program button on the smart switch to include it in the network.
    3. Once your controller has confirmed that the smart switch has been included, refresh the Z-Wave network to optimize performance.

    1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
    2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network.

    Please note that this is a user manual Plug-in Outdoor Smart Switch from GE is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Plug-in Outdoor Smart Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.