The following is an overview of the user manual for the Z-Wave product Plug-in Outdoor Smart Switch (14298/ZW4202)from GE. To view other Z-Wave products and manuals from GE follow that link.
Overview
Security
As a Z-Wave Plus certified product, Plug-in Outdoor Smart Switch supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
GE describes Plug-in Outdoor Smart Switch as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Z-Wave Scene Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Follow the instructions for your Z-Wave certified
controller to add a device to the Z-Wave network.
2. Once the controller is ready to add your device, press and
release the top or bottom of the wireless smart switch (rocker).
1. Follow the instructions for your Z-Wave certified controller
to remove a device from the Z-Wave network.
2. Once the controller is ready to remove your device, press and
release the top or bottom of the wireless smart switch (rocker).
Factory reset Plug-in Outdoor Smart Switch
1. If plugged in, unplug the Switch from the receptacle.
2. Press and hold the button for at least 3 seconds
while you plug the switch into a receptacle.
Note: This should only be used in the event your network’s
primary controller is missing or otherwise inoperable.
Please note that this is a user manual Plug-in Outdoor Smart Switch from GE is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Plug-in Outdoor Smart Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.