Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Plug-in Smart Dimmer (Single Plug) (28171 (ZW3105)) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Plug-in Smart Dimmer (Single Plug) (28171 (ZW3105))from GE. To view other Z-Wave products and manuals from GE follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Plug-in Smart Dimmer (Single Plug)
SKU Code
28171 (ZW3105)
Description
Transform any home into a smart home with the GE Z-Wave Smart Lighting Control Plug-in Smart Dimmer. The lamp module enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more! Use the dimmer control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. It provides a Z-Wave enabled outlet for the lamp you would like to control and one always-on, standard pass-through AC outlet for other electrical appliances. Take control of your home lighting with GE Z-Wave Smart Lighting Controls!
Version #
HW: 255 was the version certified
Certification #
ZC10-15080014
Certified
2015-08-18T14:41:09.9782
Z-Wave Version
6.51.06

Security

As a Z-Wave Plus certified product, Plug-in Smart Dimmer (Single Plug) supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    GE describes Plug-in Smart Dimmer (Single Plug) as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.
    2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network.

    1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.
    2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.

    Factory reset Plug-in Smart Dimmer (Single Plug)

    1. If plugged in, unplug the Switch from the receptacle.
    2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.
    Note: This should only be used in the event your network’s primary controller is missing or otherwise inoperable.

    Please note that this is a user manual Plug-in Smart Dimmer (Single Plug) from GE is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Plug-in Smart Dimmer (Single Plug) and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.