The following is an overview of the user manual for the Z-Wave product Gsl-01zw (Glamo Lock)from Glamo Inc.. To view other Z-Wave products and manuals from Glamo follow that link.
Overview
Wireless communication with the device is encrypted, anti-forgery NFC key-card are used as its master key, and also tough metal housing is adopted. When trying to unlock "GSL-01ZW(L)" forcedly or when overyly high temperature due to fire is detected, an alert will be raised.
Since "GSL-01ZW(L)" is connected with cloud side Glamo key management system, and is capable of insert, remove key data based on the system requests. It can be integrated with the existing property management enterprise and automated thus its system management cost can be greatly reduced.
Security
As a Z-Wave Plus certified product, Gsl-01zw supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Glamo describes Gsl-01zw as having the following features:
- Supported Notification Types
- Door Lock Type
- Firmware updatable via a compatible Z-Wave gateway
- Battery Quantity
- Battery powered using AA batteries
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Push the pairing button until the beep sounds three times.
If you hold the master key over the card reader, you will be in Inclusion / Exclusion mode.
Push the pairing button until the beep sounds three times.
If you hold the master key over the card reader, you will be in Inclusion / Exclusion mode.
Factory reset Gsl-01zw
Press the clear button and pairing button until the beep sounds three times.
When you hold the master key over the card reader, the setting of Z - Wave Reset is reset.
NOTE: Reset should be used only when the primary controller is missing or inoperable.
Please note that this is a user manual Gsl-01zw from Glamo Inc. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Gsl-01zw and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.