FG2200 Z-Wave Home Gateway (Gateway / FG2200) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product FG2200 Z-Wave Home Gateway (Gateway / FG2200)from Good Way Technology, Co., Ltd. To view other Z-Wave products and manuals from Good Way Technology follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


FG2200 Z-Wave® Home Gateway
SKU Code
Gateway / FG2200
1. FG2200 is the kernel of your smart home. Able to connect wireless with hundreds of compatible smart devices, allowing you to monitor, control and secure your home from anywhere.
2. Best platform providing the connection between cloud and home automation.
3. Scene editing function helps user to configure scenarios.
Version #
HW: 1 FW: 4.45:02.01 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, FG2200 Z-Wave Home Gateway supports Z-Wave S2 security. The following security modes are directly supported:


    Good Way Technology describes FG2200 Z-Wave Home Gateway as having the following features:

    • Communications Connections
    • Sensors
    • Supported Notification Types
    • Communications Protocol
    • Color
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    The Android APP application, please see manual 5.1.1

    Ensure Gateway is connected, enter device page and click “Inclusion” to include devices. After the inclusion show window is finished, you can view the device at the device interface.

    The Android APP application, please see manual 5.1.2

    Ensure Gateway is connected, enter device page and click “Exclusion” to exclude devices. After the exclusion show window is finished, you can view the device is remove from the device interface.

    The Android APP application, please see manual 5.1.3

    Ensure the Gateway not include any device or Reset the Gateway. You can review and control the device for learned Gateway. Into the Learn Mode, show “Processing…”, operate another Controller into add device mode, after the completion of the study to be prompted to add success. When you need initiate a replication of network information from the controller to another controller or want to receive network information, please enter ""include"" and ""learn mode"".

    Factory reset FG2200 Z-Wave Home Gateway

    The Android APP application, please see manual 5.1.4&4.1.5

    Click “Reset”, show “Are you sure to reset Z-Dongle?”and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.

    And manual P.10
    The gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.

    manual P.22
    If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable

    Please note that this is a user manual FG2200 Z-Wave Home Gateway from Good Way Technology, Co., Ltd is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have FG2200 Z-Wave Home Gateway and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.