Light Dimmer Switch (TD14000) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Light Dimmer Switch (TD14000)from Good Way Technology, Co., Ltd. To view other Z-Wave products and manuals from Good Way Technology follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Light Dimmer Switch
SKU Code
*Apart from traditional RGB channels,it supports the additional white light channel, which allows for adding pastel color to the color scheme
*RGBW Dimmer allows to connect four output channels and independently control each light sources.(single channel output power max to 8A)
*Control your color lighting either manually via switches or your smartphone,or automatically via a presence detector
*LED lighting perfectly suits modern design, you can create your own color compositions depending on your mood, helping you feel warm or peaceful
Version #
HW: 255 FW: 2.07 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Light Dimmer Switch supports Z-Wave S2 security. The following security modes are directly supported:


    Good Way Technology describes Light Dimmer Switch as having the following features:

    • Firmware updatable via a compatible Z-Wave gateway
    • Electric Load Type
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset Light Dimmer Switch

    Exclude the R.G.B.W. Color LED Dimmer into the Z-Wave network,
    press 3 times in 2 seconds. If the device is properly excluded, the green light will blink and the data will be reset to the factory default values.

    Please note that re-including the product will reset the data to the
    default values. Use this procedure only in the event that the network
    primary controller is missing or otherwise inoperable.

    Include Button - Inclusion, press 3 times in 2 seconds

    Exclude Button - exclusion, press 3 times in 2 seconds

    Please note that this is a user manual Light Dimmer Switch from Good Way Technology, Co., Ltd is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Light Dimmer Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.