The following is an overview of the user manual for the Z-Wave product Roller Shutter Multi Level Switch (Roller Shutter/TD11000Z2)from Good Way Technology, Co., Ltd. To view other Z-Wave products and manuals from Good Way Technology follow that link.
Overview
Security
As a Z-Wave Plus certified product, Roller Shutter Multi Level Switch supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Authenticated
- S2 Unauthenticated
Features
Good Way Technology describes Roller Shutter Multi Level Switch as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Supported Meter Type
- Window Covering Control Features
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Put the Z-Wave Controller into inclusion mode, and press the pairing button 3 times in 2 seconds to include the module.
2. Put the Z-Wave Controller into inclusion mode, and press the “external swtich1” or “external swtich2” 3 times in 2 seconds to include the module.
1. Put the Z-Wave Controller into exclusion mode, and press the pairing button 3 times in 2 seconds to exclude the device.
2. Put the Z-Wave Controller into inclusion mode, and press the “external swtich1” or “external swtich2” 3 times in 2 seconds to include the module.
Factory reset Roller Shutter Multi Level Switch
1. Press the pairing button 3 times in 2 seconds and press and hold the pairing button for more than 5 seconds at the 3rd time.
2. The module is excluded and restores to factory default setting.
3. Then the module will be in auto-inclusion mode for 2 minutes.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Roller Shutter Multi Level Switch from Good Way Technology, Co., Ltd is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Roller Shutter Multi Level Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.