Smart Meter Switch (TD13320) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Meter Switch (TD13320)from Good Way Technology, Co., Ltd. To view other Z-Wave products and manuals from Good Way Technology follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Smart Meter Switch
SKU Code
Smart Meter switch allows controlling two independent
loads both via Z-Wave wirelessly and locally utilizing a
traditional wall switch. The switch is no longer directly
connected to the load but acts as input device for the in
wall switch that is controlling the load. And this device
can calculate the total power consumption in time
periods of day, month and year. Display the values of the
measurements on the remote site.
Version #
HW: 255 FW: 2.14 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Smart Meter Switch supports Z-Wave S2 security. The following security modes are directly supported:


    Good Way Technology describes Smart Meter Switch as having the following features:

    • Electric Load Type
    • Firmware updatable via a compatible Z-Wave gateway
    • Switch Load Capacity Watts
    • Supported Meter Type
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    If you want to manually include the device, press the button for 3 times to include the device.
    LED Status: Blue LED Solid light.

    If you want to manually exclude the device, press the button for 3 times to exclude the device.
    LED Status: Green LED 1 sec. flashes 1 times

    Factory reset Smart Meter Switch

    The Device Reset Locally Notification Command is used to
    advertise that the device will be reset to default.
    Press the button 3 times in 2 sec., and hold it for more
    than 3 sec.
    Please use this procedure only when the network primary
    controller is missing or otherwise inoperable.

    Please note that this is a user manual Smart Meter Switch from Good Way Technology, Co., Ltd is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Smart Meter Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.