The following is an overview of the user manual for the Z-Wave product USB Stick (USB Stick)from Good Way Technology, Co., Ltd. To view other Z-Wave products and manuals from Good Way Technology follow that link.
Overview
2. USB 2.0 Interface Package
3. Support NWI(Network Wide Inclusion) Mode.
4. Support Multiple OS drive
Security
As a Z-Wave Plus certified product, USB Stick supports Z-Wave S2 security. The following security modes are directly supported:
Features
Good Way Technology describes USB Stick as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Inclusion mode: Blue LED Blinking slowly 5 sec.
Exclusion mode:Blue LED Blinking fast 5 sec.
Green LED Blinking/Solid:
When sending or receiving the Z-Wave command, the time the light remains on is determined by the size of the Z-Wave command packet
Red Solid:
Z-Wave USB dongle is activating,when it is ready, the light will be off.
Please note that this is a user manual USB Stick from Good Way Technology, Co., Ltd is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have USB Stick and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.