Smart Station (Model LS090WH) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Station (Model LS090WH)from Hangzhou Lifesmart Technology Co., Ltd.. To view other Z-Wave products and manuals from Hangzhou Lifesmart Technology follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Smart Station
SKU Code
Model LS090WH
LifeSmart Smart Station connects LifeSmart home automation devices with each other wirelessly. It allows users to monitor, control and automate home environment remotely from mobile devices. It helps you to care of your loves ones 24hrs even when you are away. Any unscheduled changes, like someone entering your house unannounced, you will be informed instantly.
Version #
HW: 1 FW: 1.01:01.01:00.00 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Smart Station supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Access Control
  • S2 Authenticated
  • S2 Unauthenticated


Hangzhou Lifesmart Technology describes Smart Station as having the following features:

  • Communications Protocol
  • Firmware updatable via a compatible Z-Wave gateway
  • Gateway Has Preferred Partners
  • Color
  • Communications Connections
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

Factory reset Smart Station

1. Click '+' on the upper right corner
2. Select 'Z-Wave'
3. Choose 'Reset'
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.

1. Click '+' on the upper right corner
2. Select 'Z-Wave'
3. Choose 'Add'
4. Waiting for the procedure to finish
5. Select security level
6. Input DSK code
7. Input device name

1. Choose device on homepage
2. Select '...' on the upper right corner
3. Choose 'Remove'

1. Click '+' on the upper right corner
2. Select 'Z-Wave'
3. Choose 'Learn'

Please note that this is a user manual Smart Station from Hangzhou Lifesmart Technology Co., Ltd. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Smart Station and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.