The following is an overview of the user manual for the Z-Wave product 700_stick (HKZW-STICK02)from Hank. To view other Z-Wave products and manuals from Hank follow that link.
Overview
Security
As a Z-Wave Plus certified product, 700_stick supports Z-Wave S2 security. The following security modes are directly supported:
Features
Hank describes 700_stick as having the following features:
- Controller Supports Multiple Networks
- Communications Protocol
- Firmware updatable via a compatible Z-Wave gateway
- Communications Connections
- Color
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Follow the instructions in the host application that this product is used with.
Follow the instructions in the host application that this product is used with.
Follow the instructions in the host application that this product is used with.
Factory reset 700_stick
Follow the instructions in the host application that this product is used with.
1) Open the cover.
2) Place the device within the direct range of your Z-Wave controller.
3) Set the main controller in add mode (see the controller’s manual).
4) Click the Z-button once or triple click the Z-button quickly, the LED indicator should blink fast.
5) Wait for the adding process to end.
6) Successful adding will be confirmed by the Z-Wave controller’s message.
1) Open the cover.
2) Place the device within the direct range of your Z-Wave controller.
3) Set the main controller remove mode (see the controller’s manual).
4) Triple click the Z-button quickly, the LED indicator should blink fast.
5) Wait for the removing process to end.
6) Successful adding will be confirmed by the Z-Wave controller’s message.
Press and hold the Z button for more than 5 seconds and release.
None
Please note that this is a user manual 700_stick from Hank is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have 700_stick and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.