The following is an overview of the user manual for the Z-Wave product Stick (HKZW-STICK01)from Hank. To view other Z-Wave products and manuals from Hank follow that link.
Overview
Security
As a Z-Wave Plus certified product, Stick supports Z-Wave S2 security. The following security modes are directly supported:
Features
Hank describes Stick as having the following features:
- Communications Connections
- Color
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Follow the instructions in the host application that this product is used with.
Follow the instructions in the host application that this product is used with.
Follow the instructions in the host application that this product is used with.
Factory reset Stick
Follow the instructions in the host application that this product is used with.
Please note that this is a user manual Stick from Hank is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Stick and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.