Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Smart Combustible Gas Sensor (HS1CG-Z) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Combustible Gas Sensor (HS1CG-Z)from HEIMAN. To view other Z-Wave products and manuals from HEIMAN follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Smart Combustible Gas Sensor
SKU Code
HS1CG-Z
Description
The smart combustible gas sensor is designed to detect methane(CH4), and sound alarm to remind people of the danger, it can also send notification to users' smart phone via gateway to remind of people remotely. it adopts Z-Wave wireless transmission technology. With the characteristics of high sensitivity and stablization, it can avoid fire or explosion happened in advance.
Version #
HW: 12 FW: 1.01 was the version certified
Certification #
ZC10-16125343
Certified
2016-12-06T17:51:22.038758
Z-Wave Version
6.51.09

Security

As a Z-Wave Plus certified product, Smart Combustible Gas Sensor supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    HEIMAN describes Smart Combustible Gas Sensor as having the following features:

    • Communications Protocol
    • Color
    • Communications Connections
    • Electric Load Type
    • IP (Ingress Protection) Rated
    • Switch Load Capacity Current
    • Switch Load Capacity Volt-Ampere
    • Switch Load Capacity Watts
    • Sensors
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    - Click [Add] icon in Z-Wave Controller.
    - Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second.
    - If add Process is successful, Green LED will turn on.

    - Click [Remove] icon in Z-Wave Controller.
    - Press the Net_Button 3 times within 1.5s
    - If remove Process is successful, Green LED is Blinking 6 times, then turn on

    Factory reset Smart Combustible Gas Sensor

    -Long press Net_Button at least 10 seconds in the device.
    -Device Reset Locally notification is Transmitted.
    Please use this procedure only when the network primary controller is missing or otherwise inoperable.

    Please note that this is a user manual Smart Combustible Gas Sensor from HEIMAN is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Combustible Gas Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.