Smart Metering Plug (HS2SK-Z) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Metering Plug (HS2SK-Z)from HEIMAN. To view other Z-Wave products and manuals from HEIMAN follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Smart Metering Plug
SKU Code
The smart metering plug controls devices remotely and records the power consumption of electronic devices. It is very convenient to use, for example, people can use the APP to switch on their coffee maker and air conditioner before they come back home by using the smart metering plug, they can also switch off lights, TV set and other electronic devices in house by just clicking one button in the APP when they want to go sleep. The smart metering plug makes people's life more comfortable.
Version #
HW: 255 FW: 1.01 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Smart Metering Plug supports Z-Wave S2 security. The following security modes are directly supported:


    HEIMAN describes Smart Metering Plug as having the following features:

    • Color
    • Communications Connections
    • Communications Protocol
    • Electric Load Type
    • Firmware updatable via a compatible Z-Wave gateway
    • IP (Ingress Protection) Rated
    • Switch Load Capacity Current
    • Switch Load Capacity Volt-Ampere
    • Switch Load Capacity Watts
    • Outdoor Use
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    - Click [Add] icon in Z-Wave PC Controller Program.
    - Press the SW_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second.
    - If Inclusion Process is successful, Green LED will turn off.

    - Click [Remove] icon in Z-Wave PC Controller Program
    - Press the SW_Button 3 times within 1.5s
    - If Exclusion Process is successful, Green LED is Blinking 6 times, then turn off.

    Factory reset Smart Metering Plug

    -Long press SW_Button at least 10 seconds in HS2SK-Z.
    - Device Reset Locally notification is Transmitted.
    -Please use this procedure only when the network primary controller is 
    missing or otherwise inoperable.

    Please note that this is a user manual Smart Metering Plug from HEIMAN is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Smart Metering Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.