Smart Motion Sensor (HS3MS-Z) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Motion Sensor (HS3MS-Z)from HEIMAN. To view other Z-Wave products and manuals from HEIMAN follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Smart Motion Sensor
SKU Code
When the gateway is in the armed state, once the motion sensor detects the movement of a person, it will send alarm signals to gateway, and the gateway will send the alarm signal to mobile phone App immediately.
Version #
HW: 255 FW: 3.01 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Smart Motion Sensor supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Unauthenticated


HEIMAN describes Smart Motion Sensor as having the following features:

  • Supported Notification Types
  • Color
  • Battery powered using CR2 batteries
  • Communications Protocol
  • Battery Quantity
  • Sensors
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

- Click [Add] icon in Z-Wave Controller .
- Press the Func_Button 3 times within 1.5s, Green LED is Blinking 4 times within 1 second.
- If Inclusion Process is successful, Green led will turn off.

- Click [Remove] icon in Z-Wave Controller
- Press the Func_Button 3 times within 1.5s
- If Exclusion Process is successful, Green led is Blinking 6 times, then turn off.

- Wake up Notification is transmitted every 300s by default.
- Wake up Notification is transmitted after Notification Report is Transmitted

Factory reset Smart Motion Sensor

Long press Func_Button while installing batteries in the Device
-Device Reset Locally notification is Transmitted
-Green LED Turns off after 2 seconds.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Please note that this is a user manual Smart Motion Sensor from HEIMAN is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Smart Motion Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.