Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Smart Temperature & Humidity Sensor (HS1HT-Z) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Smart Temperature & Humidity Sensor (HS1HT-Z)from HEIMAN. To view other Z-Wave products and manuals from HEIMAN follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Smart Temperature & Humidity Sensor
SKU Code
HS1HT-Z
Description
The smart humidity and temperature sensor adopts Z-Wave protocol. It is used to detect humidity and temperature. When the humidity or temperature exceeds the alarm thresholds, it will send alarm notifications to gateway immediately.
Version #
HW: 255 FW: 3.01 was the version certified
Certification #
ZC10-18076197
Certified
2018-07-24T15:59:43.120255
Z-Wave Version
6.71.03

Security

As a Z-Wave Plus certified product, Smart Temperature & Humidity Sensor supports Z-Wave S2 security. The following security modes are directly supported:

  • S2 Unauthenticated

Features

HEIMAN describes Smart Temperature & Humidity Sensor as having the following features:

  • Battery Quantity
  • Battery powered using CR2450 batteries
  • Color
  • Sensors
  • FLiRS capable
  • Supports Network Wide Inclusion
  • Supports Z-Wave Explorer Frames
  • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

Wake up Notification is transmitted every 300 seconds by default.

- Click [Add] icon in Z-Wave Controller.
- Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second.
- If Inclusion Process is successful, Green LED will turn off.

- Click [Remove] icon in Z-Wave Controller.
- Press the Net_Button 3 times within 1.5s
- If Exclusion Process is successful, Green LED is Blinking 6 times, then turn off

Factory reset Smart Temperature & Humidity Sensor

-Long press Net_Button at least 10 seconds in the product.
- Device Reset Locally notification is Transmitted.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Please note that this is a user manual Smart Temperature & Humidity Sensor from HEIMAN is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Temperature & Humidity Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.