The following is an overview of the user manual for the Z-Wave product 10 Touch Panel Switch (HTP-10S0)from Hogar Controls. To view other Z-Wave products and manuals from Hogar Controls follow that link.
Overview
Hogar Touch Panels are a fine amalgamation of beauty, style, convenience and functionality. The smooth, gleaming, glossy and glass effect Touch Panels challenge common perceptions of a light switch, electrical socket or dimmer and add a touch of elegance to your smart home.
The Hogar Controls ten-touch panels feature a stunning glass face with advanced capacitive touch sensors. It allows users to turn the devices on/off with a touch. The red/blue illumination clearly indicates its working state.
A one of a kind solution for all your smart home needs, the mechanical structure of the ten-touch panel provides you with the flexibility of suiting any gang box size of US standard electrical boxes. It is simple to install and easy to use with its innovative assembly, plug-and-play feature and completely retrofit design.
These Touch Panels are designed for a wide range of purposes where every button can be programmed to work either in switch or scene mode. Combine switches, fan dimmers, light dimmers and scene controllers at the comfort of your conventional gang boxes.
The innovative design and chic styling coupled with advanced functionalities make it a delight for users.
Security
As a Z-Wave Plus certified product, 10 Touch Panel Switch supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Hogar Controls describes 10 Touch Panel Switch as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Switch Load Capacity Current
- Neutral Wire Required
- Loads Controlled
- Switch Load Capacity Watts
- Electric Load Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Put the controller into ADD device mode. Follow the instructions provided by the controller manufacturer.
2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will blink in blue color. At this point release the key, the touch panel will start the inclusion process.
1. Put the controller into REMOVE device mode. Follow the instructions provided by the controller manufacturer.
2. Touch and hold any key on the panel for more than 5 seconds. All indication lights will blink in blue color. At this point release the key, the touch panel will start the exclusion process.
Factory reset 10 Touch Panel Switch
Using a screwdriver press the config button 5 times. All indication lights will blink in red color. Touch panel will start local reset.
Touch panel switch will erase network inclusion state after local reset. Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual 10 Touch Panel Switch from Hogar Controls is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have 10 Touch Panel Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.