The following is an overview of the user manual for the Z-Wave product Touch Panel Switch (HG-TS10)from Hogar Controls. To view other Z-Wave products and manuals from Hogar Controls follow that link.
Overview
Hogar touch panels are one-of-a-kind collection of switches that will transform walls from boring to an absolutely breath-taking.
Fits in existing electrical boxes and does not require new wires. Innovative assembly and snap-in system make it fast and simple to install.
Hogar touch panels are the modern creation of switch range that sets the tone in every room. The series makes a convincing impression with its clear structure and its choice of customized color variants. The colored glass frames come in Black, White, Moroccan Blue, Nature Green, Wooden Brown, Elegant Grey, while the metal frames are colored in Black, White, Grey and Rose Gold.
Some highlights of the smart features
- A touch can do more - Programmable touch buttons to act as a Toggle or Mono stable mode. Mono stable mode can give additional advantage of running scenes when used with Z-wave Home controller.
- Uniform dual back light LED with 2-way feedback
- Optional custom label or logo design for each button
- 2 minutes installation with no additional wiring
- Heat, Humidity and Shock proof design, No worries in wet or hot areas
- A perfect match for LED loads with protective inrush current
Security
As a Z-Wave Plus certified product, Touch Panel Switch supports Z-Wave S2 security. The following security modes are directly supported:
Features
Hogar Controls describes Touch Panel Switch as having the following features:
- Switch Load Capacity Watts
- Communications Protocol
- Loads Controlled
- Neutral Wire Required
- Switch Type
- Switch Load Capacity Current
- Firmware updatable via a compatible Z-Wave gateway
- Electric Load Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include, Touch and hold any button for more than 5 seconds. LED light blinks to indicate inclusion mode.
To exclude, Touch and hold any button for more than 5 seconds. LED light blinks to indicate exclusion mode.
Factory reset Touch Panel Switch
To reset , press and hold first button(left top) for more than 15 seconds. LED lights turn OFF and ON to indicate rest.
Note : Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Touch Panel Switch from Hogar Controls is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Touch Panel Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.