The following is an overview of the user manual for the Z-Wave product Base (NA930FR)from Homelive. To view other Z-Wave products and manuals from Homelive follow that link.
Overview
The Homelive app lets you control all the connected appliances in your home from one place, accessible from your smartphone or tablet. You can even set up custom alerts, tailored to your needs.
With Homelive, you can configure your house from your smartphone or tablet to suit your daily routine. You can, for example, arrange for the heating to come on automatically depending on the outside temperature, or program the lights to switch on at dusk.
Security
As a Z-Wave Plus certified product, Base supports Z-Wave S2 security. The following security modes are directly supported:
Features
Homelive describes Base as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
In order to include another zwave product into the gateway. Access the UI by logging into the home live portal (http://id-rec.orange.fr/auth_user/bin/auth0user.cgi).
Click on the devices tab on the left side of the window.
Click on the ""Add Device"" button on the upper right hand corner.
Select the device you want to add or ""generic Z-Wave Device"" if your device isn't in the list.
Follow the on screen instructions.
In order to exclude a Z-Wave product. Access the UI by logging into the home live portal (http://id-rec.orange.fr/auth_user/bin/auth0user.cgi).
Click on the devices tab on the left side of the window.
Click on the right arrow on the device that you want to remove
Click on the delete button at the bottom of the device settings, then ""Exclude"" and follow the on screen instructions
Factory reset Base
Access the UI by logging into the home live portal (http://id-rec.orange.fr/auth_user/bin/auth0user.cgi).
Click on the Settings Tab on the left side of the screen
Click on the backup tab and then on the ""Reset to Default"" button
N/A
Access the UI by logging into the home live portal (http://id-rec.orange.fr/auth_user/bin/auth0user.cgi).
Click on the Settings Tab on the left side of the screen
Click on Z-Wave Settings and then on the advanced tab
Click on the option to ""Copy Z-Wave network from a Primary Controller""
Please note that this is a user manual Base from Homelive is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Base and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.