The following is an overview of the user manual for the Z-Wave product Lynx Touch (L7000-ME)from Honeywell Home (Resideo). To view other Z-Wave products and manuals from Honeywell follow that link.
Overview
Security
As a Z-Wave Plus certified product, Lynx Touch supports Z-Wave S2 security. The following security modes are directly supported:
Features
Honeywell describes Lynx Touch as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Press the Automation icon on the LYNX Touch Home Screen to access Z-Wave Home Automation features.
Use down arrow to scroll to the Automation Screen Page 2, and press Tools button to access Z-Wave Device Management Screen.
Then press Exclude Devices button to enter exclusion mode and ready to exclude another Z-Wave product.
Press the Automation icon on the LYNX Touch Home Screen to access Z-Wave Home Automation features.
Use down arrow to scroll to the Automation Screen Page 2, and press Tools button to access Z-Wave Device Management Screen.
Then press Include Devices button to enter inclusion mode and ready to include another Z-Wave product.
Press the Automation icon on the LYNX Touch Home Screen to access Z-Wave Home Automation features.
Use down arrow to scroll to the Automation Screen Page 2, and press Tools button to access Advanced Tools option.
Press Advanced Tools button to access additional Z-Wave options, and then press Learn button to put the controller into learn mode.
Factory reset Lynx Touch
Press the Automation icon on the LYNX Touch Home Screen to access Z-Wave Home Automation features.
Use down arrow to scroll to the Automation Screen Page 2, and press Tools button to access Advanced Tools option.
Press Advanced Tools button to access additional Z-Wave options, and then press Reset Controller button.
Please note that this is a user manual Lynx Touch from Honeywell Home (Resideo) is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Lynx Touch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.