The following is an overview of the user manual for the Z-Wave product Plug-in Outdoor Switch (39346 / ZW4201)from Honeywell. To view other Z-Wave products and manuals from Honeywell follow that link.
Overview
Security
As a Z-Wave Plus certified product, Plug-in Outdoor Switch supports Z-Wave S2 security. The following security modes are directly supported:
Features
Honeywell describes Plug-in Outdoor Switch as having the following features:
- Color
- Firmware updatable via a compatible Z-Wave gateway
- Outdoor Use
- Switch Load Capacity Current
- Switch Load Capacity Watts
- Switch Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.
2. Once the controller is ready to remove your device, press and release the manual/program button on the smart switch to remove it from the network.
1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.
2. Once the controller is ready to add your device, press and release the manual/program button
on the smart switch to add it in the network. Now you have complete control to turn your device
ON/OFF according to groups, scenes, schedules and interactive automations programmed by your controller.
If your Z-Wave certified controller features remote access, you can control your fixture from your mobile devices.
Factory reset Plug-in Outdoor Switch
TO RETURN YOUR SWITCH TO FACTORY DEFAULTS
1. If plugged in, unplug the device from the receptacle.
2. Press and hold the manual/program button, plug the
device in, and continue to hold for at least 3 seconds.
Note: This should only be used in the event your network’s
primary controller is missing or otherwise inoperable.
Please note that this is a user manual Plug-in Outdoor Switch from Honeywell is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Plug-in Outdoor Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.